Vemer memo - Reset Menu; IR Interface

English

5SERMANUALMEMO$7$799
RESET MENU
)TISPOSSIBLETORESTORETHEINITIALSTATUSOFTHEINSTRUMENTUSINGTHE
RESETFUNCTIONDIFFERENTRESETSAREAVAILABLE
RESETSETTINGSCANCELALLTHEENTEREDSETTINGS
RESETPROGRAMMESCANCELALLTHESAVEDPROGRAMMES
RESETMETERRESETTHEWORKINGHOURSMETER
RESETALLRESETSETTINGSRESETPROGRAMMESRESETMETER
4OPERFORMARESET
PRESSKEY“
” TOENTERTHEMENU
CHOOSE2%3%4USINGKEYS“C1” and “C2”ANDPRESS“Ok”
USINGKEYS“C1” and “C2”CHOOSEONOFTHERESETSLISTEDABOVEAND
PRESS“Ok”
PRESS“Ok”TOCONFIRM
To perform a complete instrument reset, restoring the instrument to
factory conditions, you need to use a pointed object to press key “R”.
In this way all the settings carried out are cancelled and the initial
conditions restored.
IR INTERFACE
4HEINSTRUMENTSOFTHEMEMOSERIESAREEQUIPPEDWITHAN)2INTERFACE
WHICHALLOWSPROGRAMMESTOBECHANGEDOVERBETWEENINSTRUMENTAND
DEDICATEDREMOTECONTROLEASILY
!TTENTION)2INTERFACEISACTIVABLEIFTHEINSTRUMENTISSUPPLIEDBYMAIN
!#POWERONLY
)NTHISWAYITISPOSSIBLEFOREXAMPLETOCARRYOUTPROGRAMMINGONAN
INSTRUMENTANDTHENCOPYITONTOTHEREMOTECONTROLANDDUPLICATEITON
THEOTHERINSTRUMENTSWITHOUTTHENECESSITYOFREDOINGSTEPBYSTEP
PROGRAMMING
4HEREMOTECONTROLISNOTSUPPLIEDBUTMAYBEPURCHASEDSEPARATELYAS
ANACCESSORY
Code Model Description
VE345500 MEMO2# )2)TALYREMOTECONTROL
VE366100 MEMO2# )2%NG&RA$EU%SPREMOTECONTROL
4HEREARETWOBASICFUNCTIONSINTHISWORKINGMODE
- COPYALLOWSTHEPROGRAMMESTOBETRANSFERREDFROMACLOCKINTHE
MEMOSERIESTOTHEREMOTECONTROL
- PASTEALLOWSTHEPROGRAMMESTOBETRANSFERREDFROMTHEREMOTECONTROL
TOONEORMORETHANONECONTEMPORARILYCLOCKINTHEMEMOSERIES