Vemer memo - Safety Warnings; Technical Characteristics

English
- 3 -
5SERMANUALMEMO$7$799
SAFETY WARNINGS TECHNICAL CHARACTERISTICS
1) The instrument must be installed and started up by a
qualified person, strictly in observance of the connection
diagrams shown in this manual.
2) After installation inaccessibility to the terminals without
using dedicated tools must be guaranteed
3) Before accessing the connection terminals, make sure that
the leads are not live.
4) Do not connect or feed the instrument if any part of it is
damaged
5) The instrument must be installed and activated in
compliance with current electric systems standards.
6) Do not use the instrument for anything other than the
indicated purpose
Code Model Description
VE339800 MEMO$7 RELAYDAILYWEEKLYCLOCK
VE341400 MEMO$7 RELAYDAILYWEEKLYCLOCK
VE340600 MEMO9 RELAYDAILYWEEKLYMONTHLYYEARLYCLOCK
VE342200 MEMO9 RELAYDAILYWEEKLYMONTHLYYEARLYCLOCK
s 0OWERSUPPLY6AC¢(Z
s !BSORPTION6!7
s 2EPLACEABLEBATTERY
s /UTPUTMONOSTABLECHANGEOVERCONTACT!6AC
VERSIONS$7AND9
  RELAYSWITHMONOSTABLECHANGEOVERCONTACTS
!6ACVERSIONS$7AND9
s 4YPEOFACTION"
s -EMORISABLEPROGRAMMESFOREACHCHANNEL
 EVENTSONOFFIMPULSECYCLE
 PERIODSHOLIDAYDAYS
s "ACKLIT,#$DISPLAY
s )NTEGRATED)2INTERFACEWITHMRANGEWITHDIRECTSOLARLIGHTM
INTHEDARK
s )2TRANSMISSIONFREQUENCYK(Z
s 3OFTWARECLASS!
s -OUNTING$).RAILTOBACKPLANE
s #ONTAINER$).MODULES
s /PERATINGTEMPERATUREª#ª#
s 3TORAGETEMPERATUREª#ª#
s 0OLLUTIONLEVEL
s 2ATEDIMPULSEVOLTAGEK6
s $EGREEOFPROTECTION)0FORTHETERMINALS
s )NSULATIONREINFORCEDBETWEENACCESSIBLEPARTSFRONTALANDALLTHE
OTHERTERMINALS