Brake pedal
When the complete vehicle needs to slow down during driving, move
your right foot to the brake pedal and gently press the brake pedal to slow down
the vehicle until it stops.
Note: Emergency brake should be avoided!
Parking brake handle - Used for parking brake.
Steering wheel - Control the driving direction of the vehicle.
Combination instrument
Display current vehicle status information, capacity, speed, mileage, light
signals, etc. Duri
ng driving, you can know whether the operation is correct
accor
ding to the lighting of the indicator light in the dashboard.
Combination switch
1. Turn signal lamp: When turning the lever forward, the left turn signal
lamp flickers, and the left turn signal indicator lamp lights up on the dashboard
at this time. When turning the lever backward, the right turn signal indicator
lamp lights up.
2. Low beam: The front half end of the lever can be turned. After the
vehicle starts, t
urn the lever forward for two gears to turn on the low beam.
Turn the lever backward to turn off the low beam.
3. High beam: Lift the lever (steering wheel surface) to turn on the high
beam. After releasing the lever, the lever will be automatically reset, and the
high beam turns off at this time. Turn on the low beam first, and then lift the
lever. At this time, the lever will not b
e automatically reset, thus realizing the
perm
anent lighting of the high beam.
4. Horn: The head end of the lever is a horn button, which can be pressed
lightly.
Please be familiar with all operations before driving, strictly abide by
the operation process and avoid illegal operation!
To Next Page
Loading...
General