EN36
… the power button
to switch on the appliance does not appear in the dis-
play, even though the switching power supply is connected to the mains?
Please check whether the switching power supply is firmly plugged into the
drive unit.
i
Action: Remove upper housing. Check for correct positioning (see cleaning
instructions for the upper housing). Then switch the appliance on again.
… WATER is shown in the display, even though there is water in the lower
housing?
Please check whether there is sufficient water in the lower housing and/or
whether the upper housing is placed correctly on the lower housing.
i
Action: Remove upper housing. Fill lower housing with tap water to the
WATERLINE mark. Place upper housing correctly on lower housing.
Make sure that the switching power supply cable is not trapped between the
upper and lower housings. Then switch the appliance on again.
VENTA SERVICE TEAM
Do you need additional information about your Venta appliance, do you want ad-
vice or to order accessories? Our Service Team is there for you! Call us directly,
or visit the Venta website: www.venta-air.com
DE
+49 751 5008 88
To Next Page
Loading...
