Lift the motor out of the housing, remove
the power cable, and set it aside for a mo-
ment.
On
the
Inside of one of the panels is a sticker with
the serial number on it. Write this number
down as you’ll need it later!
3. EXAMINE
YOUR HUMIDIFIER
Check both the upper housing and the motor for any cracks or damages. If both are
fine, place the motor back inside its housing, making sure to plug it back in as you do
so. Close the upper housing, starting with the vented panels, and clip the tabs. Set the
upper housing upside down.
5US
To Next Page
Loading...
