EASY SETUP GUIDE
WELCOME TO THE VENTA COMMUNITY!
Setting up your humidifier is much simpler than you would expect. Just follow
these 7 steps and your humidifier will be up-and-running in less than 10 minutes!
1. UNPACKING
First things first, remove bottle(s) of Water Treatment Additive
from the corner of your packaging (o
ne sample bottle for LW15/
LW25 models, two sample bottles for LW45 models)
. Keep these
handy as you’ll need them in a bit. Unpack your
humidifier
setting the Styrofoam aside. You may want to return the
Styrofoam to the box and keep the box for any future humidifier
storage needs.
2. OPENING THE HUMIDIFIER
Open the top of your humidifier by releasing the tabs on the control panel and opening
the four panels, starting with the non-vented panels.
1 1
2
2
4
US
To Next Page
Loading...
