Remove the upper housing from the lower housing and set it aside for a
moment. Take the lower housing over to your sink/bathtub/water source and
fill it with regular tap water up to the water line. Remember the bottle(s) of
Water Treatment Additive? Go grab those and pour them into the water
in the lower housing. Once it’s filled, carry it back over to the upper housing.
Place the upper housing back onto
the lower housing.
6. TURN IT ON
Plug the humidifier in, press the power button, set the power setting to the
highest level, and enjoy the fresh air! At the highest power setting, the
humidifier will need to run continuously for about 7-10 days to properly
condition the room it is in. After that, you will notice the full impact of the
humidifier upon the air in your home!
7
To Next Page
Loading...
