E - 13
Dolby Digital (for DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to
audio output when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier.
This unit automatically recognises DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo
on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D
symbol are trademarks of Dolby Laboratories.
UNIT OPERATION
SOUND SYSTEM
Turning the Unit On
The system is in the standby condition (STANDBY indicator lights) when the AC power supply cord or Car adaptor
is connected.
1. Slide the POWER ON/OFF switch (on unit) to the ON position to turn ON the unit.
• If you select DVD the DVD logo (start-up picture) will appear on screen.
2. Press STANDBY button (on remote) to standby mode.
3. Press STANDBY button (on remote) again to turn ON the unit.
• When the unit is not going to be used for a long time, disconnect the AC power supply cord or Car adaptor
from the AC outlet or 12V car socket.
To Next Page
Loading...
Need help?
General
