-13-
USB Operation
BASIC MINI SYSTEM OPERATION
●Press SOURCE on the main unit repeatedly to enter to USB mode.
Basic USB operation:
This unit has a USB port located on the front terminal of the unit. The purpose of this input is to enable
MP3 playback from your USB STICK, FLASH DRIVE and/or MEMORY STICK. (THIS PORT IS NOT INTENDED
FOR CHARGING).
Insert your USB device, the micro system will recognize its connection if READING is displayed across the
display screen.
The mini system will automatically pick up any MP3 files located on the USB device and begin play back.
The mini system will automatically organize the playlist of the MP3 files.
Proceed to use PLAY/PAUSE, NEXT, PREVIOUS and STOP located on your remote and unit to control.
SOURCE
To Next Page
Loading...