Why Verathon BladderScan i10 says no probe detected?
If your Verathon Medical Equipment displays 'No probe detected,' verify the connection between the probe and the console to ensure it's secure.
What to do if Verathon BladderScan i10 Medical Equipment scan did not identify a bladder?
If the scan on your Verathon Medical Equipment doesn't identify a bladder, make sure the probe is making good contact with the patient, you're using enough gel, and the probe is positioned correctly.
What to do if Verathon Medical Equipment says external storage device removed?
If your Verathon Medical Equipment says an external storage device has been removed, check the connection between the USB flash drive and the console. You can also try using a different USB flash drive.
What to do if Verathon Medical Equipment console is too hot?
If the console of your Verathon Medical Equipment is too hot and might turn off, turn off the system and wait until the battery returns to a normal temperature.
How to reassemble Verathon BladderScan i10 printer drive roller?
If the printer drive roller has fallen out of your Verathon Medical Equipment, put it back into place. The gear should be on the right when viewed from the front of the printer.
What to do if Verathon BladderScan i10 Medical Equipment has overcharged battery?
If your Verathon Medical Equipment has an overcharged battery, turn off the system and contact Verathon Customer Care.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Verathon |
| Technology | Ultrasound |
| Measurement Range | 0 - 999 mL |
| Display | Color LCD |
| Battery Type | Rechargeable Lithium-ion |
| Weight | 1.1 kg (2.4 lbs) |
| Connectivity | USB |
| Regulatory | FDA Cleared, CE Mark |
To Next Page
