Why Verathon BladderScan i10 says no probe detected?
If your Verathon Medical Equipment displays 'No probe detected,' verify the connection between the probe and the console to ensure it's secure.
What to do if Verathon BladderScan i10 Medical Equipment scan did not identify a bladder?
If the scan on your Verathon Medical Equipment doesn't identify a bladder, make sure the probe is making good contact with the patient, you're using enough gel, and the probe is positioned correctly.
What to do if Verathon Medical Equipment says external storage device removed?
If your Verathon Medical Equipment says an external storage device has been removed, check the connection between the USB flash drive and the console. You can also try using a different USB flash drive.
What to do if Verathon Medical Equipment console is too hot?
If the console of your Verathon Medical Equipment is too hot and might turn off, turn off the system and wait until the battery returns to a normal temperature.
How to reassemble Verathon BladderScan i10 printer drive roller?
If the printer drive roller has fallen out of your Verathon Medical Equipment, put it back into place. The gear should be on the right when viewed from the front of the printer.
What to do if Verathon BladderScan i10 Medical Equipment has overcharged battery?
If your Verathon Medical Equipment has an overcharged battery, turn off the system and contact Verathon Customer Care.
General introduction to the BladderScan i10 system's purpose, components, and intended use.
Critical safety guidelines, including ultrasound energy, contraindications, and warnings.
Overview of the BladderScan i10 system, its core components, and accessories.
Step-by-step instructions for physically assembling the BladderScan i10 system components.
Guide to customizing system preferences, including general, administrative, and exam settings.
Detailed procedure for performing bladder volume measurements, including patient preparation and scanning.
Instructions for recalling, deleting, and exporting patient exams stored on the system.
Information on approved cleaning agents and their efficacy for system components.
Guidelines for effective cleaning and disinfection of the BladderScan i10 system.
Recommendations for weekly visual inspections of system components for damage.
Information on system calibration requirements and the CaliScan test procedure.
Guidance on obtaining and installing software upgrades for the BladderScan i10 system.
Instructions for the environmentally responsible disposal of the system and its accessories.
Steps to perform system diagnostics and review test results.
Instructions for updating the BladderScan i10 system software.
Guide to performing the CaliScan test for probe function verification.
Procedure for safely shutting down the BladderScan i10 system.
Information on accessing onboard tutorials, help text, and customer support.
General troubleshooting steps for common system issues.
Specific troubleshooting steps for common console battery and probe connection issues.
Details general and electrical specifications for the BladderScan i10 system.
Specifications for individual system components like the probe and printer.
Information on the system's compliance with EMC standards and emissions.
Guidelines for maintaining electromagnetic interference limits with specified accessories.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Verathon |
| Technology | Ultrasound |
| Measurement Range | 0 - 999 mL |
| Display | Color LCD |
| Battery Type | Rechargeable Lithium-ion |
| Weight | 1.1 kg (2.4 lbs) |
| Connectivity | USB |
| Regulatory | FDA Cleared, CE Mark |
To Next Page
