Verathon BladderScan i10 - Procedure 2. Clean the Printer (Optional)

53
Operations & Maintenance Manual: Reprocessing
0900‑5005 REV‑00
PROCEDURE 2. CLEAN THE PRINTER (OPTIONAL)
1. If the system is on, press the On/Offbutton . If prompted, confirm
that you want the system to shut down, and then wait for it to do so.
2. Using a wet cloth or a wipe indicated for cleaning medical devices,
wipe the printer according to the instructions provided by the
wipe’s manufacturer. Repeat as needed to make sure that all visible
contamination is removed.
3. If the printer remains wet, you may use a clean soft cloth or paper
towel to remove any residual cleaningsolution.