Verathon BladderScan i10 Calibration Manual

4
0900-5104 REV-00
Procedure 3. dISASSeMBLe THe cALIBrATIoN TANK (oPTIoNAL)
Follow these steps if you store the calibration tank between uses.
1. Remove the tank lid from the tank base.
2. Remove the target from the base.
3. Empty the water from the base.
4. Using a soft, clean cloth, dry the target, the base, and the lid.
If you empty the calibration tank and store it between uses, store it in a location that protects it
from impact and other damaging external forces.
CAUTION

Verathon BladderScan i10 Specifications

General

Brand	Verathon
Model	BladderScan i10
Category	Medical Equipment
Language	English