VeriFone DS9208 User Manual

2
Installation
To p a z
To install the DS9208 scanner with the supplied cable, connect the cable to COM port 8
on the back of the Topaz.
Ruby2
To install the DS9208 scanner with the supplied cable, connect the cable to COM port 8
on the back of the Ruby2.
Two scanners can be used on any given register. COM port 8 is the
default port, however COM port 1 can be used for the secondary
scanner. The scanners may be moved from these default ports if
necessary.

VeriFone DS9208 Specifications

General

Brand	VeriFone
Model	DS9208
Category	Barcode Reader
Language	English