11 | P a g e
Other Required and Optional Pinpad Configuration
Before the pinpad can be used in CRE/RPE the firmware may need to be updated.
If your pinpad is connected via an Ethernet connection it will need to be sent to pcAmerica for the
upgrade, for more information please contact your pcAmerica sales representative at 1-800-722-6374.
For instructions on checking the correct encryption settings for the Pinpad please see the following
document:
http://faq.pcamerica.com/file-lockers/pdf-locker/MX850_Encryption_Settings.pdf
The MX800 series pinpads have the ability to have custom images or logos uploaded to it.
If your pinpad is connected via an Ethernet connection it will need to be sent to pcAmerica to have
images uploaded to it, for more information please contact your pcAmerica sales representative at 1-
800-722-6374.
To Next Page
Loading...
Need help?
General
