VeriFone MX800 Series Installation

5 | P a g e
2. Using a narrow tool such as a paperclip press the
button in the hole to reset the device, it may take
a minute or so.
3. After some time with the device configuring you
should see a screen (pictured left) asking for a
password.
Default password: 166831
Note: If the above password does not work then you
can also try: 166832
4. This will display the System Mode, which is where
all the settings for the MX800 series pinpads are
checked and set.

VeriFone MX800 Series Specifications

General

Brand	VeriFone
Model	MX800 Series
Category	Touch terminals
Language	English