DEVICE SETUP
Inside the Shipping Carton
T650
M INSTALLATION GUIDE 11
6 Inspect the terminal for possible tampering. See how to identify signs of
tampering in section Periodic Inspection.
7 Save the shipping carton and packing material for future repacking or moving
of the device.
Periodic Inspection Periodically inspect the terminal for possible
tampering. Signs of tampering
include:
• Overlays in the PIN pad area
• Foreign objects inserted into the smart card slot or magnetic stripe slot
• Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side
• Signs of damage to the tamper-evident labels
• A Tamper Warning message on the device display
If any device is found to have been tampered with, please remove it from ser
vice
immediately, keep it available for a potential forensics investigation, and notify
your company security officer and your local Verifone representative or service
provider. To contact Verifone, please see Verifone Service and Support.
Do not use a tampered or damaged unit. The device comes equipped with
tamper-evident labels. If a label or component appears damaged, please notify
the shipping company and your Verifone service provider immediately.
To Next Page
Loading...
Need help?
General
