Edit#: 001 Title: VT41 Bilingual Manual, Trim to A5 size
Date: 12/19/19 Version: Rev5
How to Use — continued
Customizing the Length of Your Session
You can customize the length of your light therapy
session in 15 minute increments.
Step 1 - Touch and hold your finger on the left control
for 1 second.
Step 2 - Continue to hold your finger on the control
and select the length of your light therapy session.
Each dot of light represents fifteen minutes.
Step 3 - Remove your finger when the desired time
has been illuminated. The illuminated dot(s) will pulse
three times to recognize the chosen session time
and indicate that the programming mode has been
completed.
Note: If you touch the control again before the
completion of the three pulses, you will be able to
continue to modify the session time.
Stopping the Countdown Timer
Touch and hold the countdown timer control until the illuminated dot(s) turn(s)
off. If you would also like to turn off the light, press the on/off button at the top
of the lamp to turn the power off completely.
power button
7
VT41_MAN_Rev5-001.indd 7VT41_MAN_Rev5-001.indd 7 12/19/19 9:59 AM12/19/19 9:59 AM
To Next Page
Loading...
Need help?
General
