VERITAS Mk.II Honing - User Manual

Mk.II Honing Guide
05M09.01
U.S. Pat. No. 7,553,216

Summary

Step 2: Setting the Honing Guide

Step 3: Setting the Registration Jig

Registration jig installed

Diagram showing the registration jig installed and set for a specific angle.

Step 4: Installing the Blade

Step 5: Honing the Primary Bevel

Micro-bevel knob set for honing primary bevel

Shows the correct setting of the micro-bevel knob for the primary bevel.

Step 6: Honing the Micro-Bevel

Micro-bevels

Illustrates the primary and micro-bevels on a blade.

Micro-bevel knob set for honing the micro-bevel

Shows the micro-bevel knob setting for creating a micro-bevel.

Back Bevels

Configuration for honing back bevels

Setting low-angle back bevels with spacer block

Instructions for setting low-angle back bevels using a spacer block.

Honing Guide Maintenance

Narrow-Blade Head

Mounting the narrow-blade carrier onto the straight roller base

Connecting the registration jig onto the narrow-blade carrier

Installing a chisel

VERITAS Mk.II Honing Specifications

General

Product Type	Honing Guide
Model	Mk.II
Material	Aluminum
Blade Angle Range	15 to 54 degrees
Use	Sharpening and Honing
Adjustability	Adjustable for different blade angles
Compatibility	Chisels, plane blades