8
Install the 4G SIM Card
If you have not already done so, please follow these instructions to install your new 4G SIM Card.
To open the case and install the 4G SIM Card
Open the protective cover. Look for a small divot at the end of the back panel closest to the
USB connector, into which you can insert a ngernail.
Insert the 4G SIM Card with the contact points (typically gold-colored) facing toward the
device. Position the card with the notched corner as circled below and slide the card into the
slot.
Gently push the 4G SIM Card forward until the spring catches and the card remains securely
in the slot.
Replace the back panel on the device.
The SIM Card must remain in the wireless device when in use.
NOTE Should your SIM Card be lost or damaged, visit verizonwireless.com/myverizon to order
a replacement SIM Card. You can also call 1-800-922-0204 to speak with a Customer Service
Representative. For toll-free support outside of the U.S. call +1-908-559-4899 for 24/7 global
support.
For additional information about 4G SIM Cards, visit verizonwireless.com/4GSIM.
A Subscriber Identity Module (SIM Card) is a “smartcard” that houses personal information, such as
your mobile phone number, calling plan, account information, and content, such as contacts, text
messages, and call history.
The Verizon Wireless 4G SIM Card is compatible with any Verizon Wireless 4G certied device.
You can move the 4G SIM Card from one device to another and your wireless service will work
seamlessly as long as you have a compatible device and service plan. To see which devices are
compatible with the Verizon Wireless 4G SIM Card, visit verizonwireless.com/certifieddevice.
To Next Page
Loading...
Need help?
General
