to leave a message, we will get back to you as
quickly as we can.
3) An error code like the one below means that you
entered spaces and/or dashes in one of you phone
numbers. Be sure you have no spaces or dashes.
Cannot access the SET-UP menu:
Reasons for issue:
1) SD card not inserted
2) SD card is corrupt
3) Batteries are low
Suggestions to remedy
1) Install new SD card
2) Replace batteries
Tricks and tips on field setup:
For best results, mount the camera
approximately 3 feet off the ground facing
straight forward, as level as possible.
To Next Page
Loading...