• A web browser, such as Chrome™, Firefox®, Internet Explorer 8® or higher, or Safari® 5.1 or higher
1.2/ FEATURES
Your Fios Home Router features include:
• Support for multiple networking standards, including
–– WAN – Gigabit Ethernet and MoCA 1.1 interfaces
–– LAN – 802.11 b/g/n/ac/ax, Gigabit Ethernet and MoCA 2.5 interfaces
• Integrated wired networking with 4-port Ethernet switch and Coax (MoCA)
–– Ethernet supports speeds up to 1000 Mbps
–– MoCA 2.5 and 1.1 enabled to support speeds up to 700 Mbps over coaxial cable
• Integrated wireless networking with 802.11b/g/n/ac/ax access point featuring:
–– Enabled 802.11b capable speeds (based on device)
–– Enabled 802.11g capable speeds (based on device)
–– Enabled 802.11n capable speeds (based on device)
–– Enabled 802.11ac capable speeds (based on device)
–– Enabled 802.11ax capable speeds (based on device)
• Enterprise-level security, including:
–– Fully customizable firewall with Stateful Packet Inspection (SPI)
–– Content filtering with URL-keyword based filtering, parental controls, and customizable filtering policies per
computer
–– Intrusion detection with Denial of Service protection against IP spoofing attacks, scanning attacks, IP fragment
overlap exploit, ping of death, and fragmentation attacks
–– Event logging
–– MAC address filtering
–– Static NAT
–– Port forwarding
–– Port triggering
–– Access control
–– Advanced wireless protection featuring WPA2/WPA Mixed Mode and MAC address filtering
• Options, including:
–– DHCP server
–– WAN interface auto-detection
–– Dynamic DNS
–– DNS server
–– LAN IP and WAN IP address selection
–– MAC address cloning
–– IPv6 support
–– QoS support (end to end layer 2/3) featuring: Differentiated Services (Diffserv), 802.1p/q prioritization, and pass-
through of WAN-side DSCPs, Per Hop Behaviors (PHBs), and
queuing to LAN-side devices
–– Remote management and secured remote management using HTTPS
–– Static routing
–– VPN (VPN pass through only)
–– IGMP
–– Daylight savings time support
1.3/ GETTING TO KNOW YOUR Fios Home Router
1.3a/ FRONT PANEL
The front panel’s unified button allows quick access to the Wi-Fi Protected Setup (WPS) feature and pairing mode.
The Router Status LED will be on white and solid when your router is turned on, connected to the internet, and
functioning normally.
Router Status LED