Verizon Wireless Hotspot Setup – Orbic Speed
Step 1 Insert Battery into Jetpack
Slide back cover off jetpack and insert battery.
Be sure that the battery contacts line up with
contacts of device.
Step 2 Power on your Jetpack
Press and hold the Power button for 3
seconds and wait for the screen to turn on.
Note: Make sure your Jetpack is charged by
plugging in the cord in the charging port.
Step 3 Connecting to your Jetpack
Your Wi-Fi Name (SSID) and Password can be
found on your Jetpack display upon initial power
up.
You can also find your Wi-Fi Name and Password
any time you need. Just select the WiFi info
button when the display is on.
Step 4 Connecting to the Internet
1) Open your device’s Settings application.
2) Click on the Wi-Fi option to view the available
networks around you .
3) Find your Jetpack’s Wi-Fi name, titled “4G-WIFI-
2.4G-xxxx”or “4G-WIFI-5G-xxxx”
4) Click Connect and enter the Password when
prompted
Need Help?
Call 800-922-0204 for help setting up your Jetpack device. (Verizon customer service
To Next Page
Need help?
General
