Verkada Inc. 405 E 4th Ave, San Mateo, CA, 94401
sales@verkada.com
All specications are subject to change without notice.
Copyright © Verkada Inc . All rights reserved.
Battery Backup
Installation
Battery Backup(Optional)
A 24 Volt 18 Ah Battery can be connected to
the F2 connectors located at the bottom of the
AC62. You can t one battery at the bottom-
right of the AC62.
We recommend and sell a 24 Volt 18Ah Sealed
Lead Acid Rechargeable battery.
Connect
Connect the AC62 to your network using either of the Ethernet ports located at the bottom of the controller.
If you are installing multiple controllers, you can connect up to 4 additional controllers via the spare Ethernet
port on each controller.
Connect the AC62 power supply to your standard power outlet (110VAC - 240VAC).
To Next Page
Loading...