Vermont Castings Encore 2550 Service Procedure

Encore 2550 Service Procedure
REPLACING THE REFRACTORY PACKAGE
1. Open the damper and remove the handle stub (faucet). Use an Allen key wrench to loosen the Allen bolt in the
base of the damper handle stub. Pull the handle off the damper rod.
2. Remove the andirons; one 7/16" hex head bolt each.
3. Remove the throat hood; swing its bottom edge forward and then slide the hood to one side until the trailing
end drops from its supports. Take it out of the stove.
4. Use a hammer to tap the two wedges upward and out of the stove

Vermont Castings Encore 2550 Specifications

General

Category	Wood stove
Model	Encore 2550
Fuel Type	Wood
Efficiency	78%
Log Size	Up to 18 inches
Flue Size	6 inches
EPA Certified	Yes
Burn Time	Up to 10 hours
Material	Cast Iron
Blower Included	Optional
Catalytic Combustor	Yes
Warranty	Limited Lifetime