1-1
1. Introduction
The Versalift aerial device has been designed and engineered to conveniently place
personnel at work stations above the ground. This aerial device, as manufactured, meets
or exceeds all applicable EN 280 requirements. Full controls at the platform and complete
freedom of boom movements make the Versalift a truly flexible and functional work
platform.
This manual is furnished to provide practical and essential information for efficient operation
of the Versalift aerial device. Proper operation of this aerial lift is the responsibility of the
operator and requires a thorough understanding of its capabilities. Personnel responsible
for the operation of the aerial lift must be familiar with and understand this manual.
THIS MANUAL CONTAINS CONFIDENTAL INFORMATION AND IS SOLE
PROPERTY OF TIME MANUFACTURING, AND IS NOT TO BE DISCLOSED,
COPIED, OR REPRODUCED WITHOUT EXPRESSED PERMISSION OF TIME
MANUFACTURING COMPANY.
The standards and regulations in force in the country of operation must be complied with.
Detailed information for the maintenance inspection and service of the Versalift aerial
device can be found in the accompanying Service Manual. Should further installation
information be required, contact your local Versalift dealer, Time Manufacturing
Company, or Time-Export.
DANGER: THIS EQUIPMENT SHOULD BE OPERATED AND SERVICED
ONLY BY COMPETENT PERSONNEL FAMILIAR WITH
GOOD SAFETY PRACTICES. THIS INSTRUCTION IS
WRITTEN FOR SUCH PERSONNEL AND IS NOT INTENDED
AS A SUBSTITUTE FOR ADEQUATE TRAINING AND
EXPERIENCE IN SAFE PROCEDURES FOR THIS TYPE OF
EQUIPMENT.
DANGER: READ AND UNDERSTAND THIS MANUAL BEFORE
ATTEMPTING TO OPERATE THIS AERIAL DEVICE.
The manual identifies all the controls and their locations and describes how the controls
function. Routine preventive maintenance is very important in maintaining reliable aerial lift
service. A preventive maintenance schedule is provided and must be understood and
followed by all operators.
To Next Page
Loading...
Need help?
General
