PAGE 23
Attention
When tread groove is below 0.5mm it can easily lead to vehicle slippage,
making braking distances longer. Therefore replace the tyres as early as
possible when they do not have insucient tread depth.
Attention
When conducting maintenance of your vehicle, please turn the power switch
to OFF and remove the charger cords.
Suggestion
Ask for help from your scooter dealer to inspect or replace the fuse, since the
tiller shroud has to be removed rst before you can replace the fuse.
Suggestion
» Do not splash water directly to wash your scooter as this could lead to
malfunction of the system electrics.
» Do not use petrol, solvents or vaporizing solution as these may deform
or damage the shrouds.
» Do not use wax.
Tyres
The condition of the tyres depends on how you drive and use your scooter.
» Inspecting tyre tread
» Please check the tread groove regularly. Replace the tyres when the tread groove
is less than 0.5 mm.
6. INSPECTION & MAINTENANCE
To Next Page
Loading...
General