PAGE 4
2. SAFETY NOTICE
Starting and Driving
1. Make sure the seat is installed properly.
2. Make sure the tiller has been secured properly.
3. Fold down the armrests so you can rest your arms on them.
4. Turn the power switch to “ON”. If necessary, turn on the headlights.
5. Check battery indicator to see whether there is enough power for your journey.
If you have any doubt about the remaining power, please recharge the batteries
before departure.
6. Set the speed dial to a position you feel safe and comfortable with.
7. Check the forward/reverse speed lever works correctly.
8. Make sure the electromagnetic brake works correctly.
9. Make sure it is safe around you before you drive on the street.
Warning!
» Do not set in freewheel mode when driving on a gradient.
» Always re-engage the anti-freewheel device before use. Failure to do so
may result in injury.
» To protect your safety, the power will automatically cut o and
electromagnetic brake system will activate while you are driving down a
steep gradient. This will limit the speed to a safe level. Turn the power on
again to re-start your scooter.
» Maximum User Weight Limit
Refer to section entitled “MAX. USER WEIGHT” in “ 8. SPECIFICATION “.
Overloading past the weight limit may lead to damage of your scooter or
cause it to malfunction and will endanger your safety. The warranty does
not cover this type of damage.
To Next Page
Loading...
General