Vertex Rx-C 6D User Manual

Vertex™ Rx-C 6D Calcium Reactor / Instruction Manual © Vertex Aquaristik ™GmbH, Deutschland 2014
Page
1
Vertex™ Rx-C 6D Calcium Reactor
Thank you for your purchase of the Vertex™ Rx-C 6D Calcium Reactor. Please be sure to read and follow this brief
guide to ensure proper install and operation of your device.
In the box:
1) Primary Chamber
2) Secondary Chamber
3) CO2 Interface Chamber
4) Bubble Counter
5) Flow Meter
6) Sicce™ Syncra 1.5 / Custom Bracket
7) PVC Pump Head
8) Reactor Base
9) Precision Needle Valve
10) Red, White & Black LLPDE tubes / 3m (6’) length each
11) CO2 Chamber Media
12) Sicce™ Syncra 1.5 Instruction Manual
13) Vertex™ Rx-C 6D Instruction Manual
Important Safety Warnings:
This is an electrical device operated in close proximity to water; be cautious, follow instructions and use
common sense.
Do not touch the plug and/ or the electrical outlets with wet hands. Always dry your hands first.
Rx-C 6D and its components are solid heavy objects, impact can cause bodily harm, loss of life and/ or
damage to property.
Do not attempt to service the unit while in operation or connected to electricity.
Unless you are qualified; service only by authorized service professionals.
Do not attempt to alter the product. Do not attempt to alter the Motor-Block or the Impeller Assembly.
Do not touch the impeller and/ or attempt to turn the Impeller when the unit is connected to power.
Ensure the product is free of defect and properly assembled before putting in operation.
Drip-Loop is required where the Power-Cable is connected to the Power-Outlet.
Do not carry, lift or hold the pump or the reactor by its cable.
Do not carry, lift or hold the reactor by its upper manifold. To service or move the reactor; do so one
chamber at a time. Do not lift or carry the reactor while assembled on its base.

Vertex Rx-C 6D Specifications

General

Brand	Vertex
Model	Rx-C 6D
Category	Pet Care Product
Language	English

Summary

Important Safety Warnings

General Safety Precautions

Essential safety guidelines for operating the calcium reactor near water and handling electrical components.

Installation

Initial Inspection and Cleaning

Inspecting components for defects, cleaning with RO water, and leak testing procedures.

Assembling Primary and CO2 Chambers

Detailed steps for assembling the primary chamber, CO2 interface chamber, and connecting the pump.

Connecting Pump and Secondary Chamber

Steps for connecting the pump to the motor block, attaching the secondary chamber, and its components.

Finalizing Tubing and Valve Connections

Procedures for connecting tubing, cutting ends properly, and installing the needle valve.

Operation

Media Types and Preparation

Information on Calcium Carbonate, Magnesium, and Phosphate Remover media, including rinsing.

Carbon Dioxide Supply and Safety

Guidelines for connecting CO2 supply, safety precautions for handling pressurized CO2 tanks.

Source Water and Initial Setup

Methods for supplying source water and initial priming of the reactor with tank water.

Starting Your Reactor

Step-by-step guide to starting the reactor, adjusting flow, CO2, and monitoring initial parameters.

Control

Monitoring and Regulation

Recommendations for using controllers to monitor and regulate CO2 injection and effluent pH.

Maintenance

Reactor Disassembly and Cleaning

Instructions for disassembling the reactor for thorough maintenance and cleaning.

Pump Maintenance

Steps for disassembling the pump for decalcification and cleaning using mild solutions.

Useful Tips for Maintenance

Advice on lubrication, checking for blockages, and flow meter maintenance.

Warranty, Service and Conditions

Warranty Coverage and Exclusions

Details on the two-year limited warranty, covered items, and exclusions like misuse.