back to start/ready status.
Press this key during exercises, the incline display window will
blink. At this time, press the NUMERIC keypad again to
choose the incline value, then press ENTER to confirm. If the
set value exceeds the upper and lower limits of the treadmill,
this value will be not accepted. The user needs to input the
acceptable data again(0-15).(When setting LEVEL in
PROGRAM, press this key is invalid during exercises.)
Press this key during exercises, the speed display window will
blink. At this time, press the NUMERIC keypad again to
choose the speed value, then press ENTER to confirm. If the
set value exceeds the upper and lower limits of the treadmill,
this value will be not accepted. The user needs to input the
acceptable data again(0.8-25km/0.5-15.6miles).
The sound volume controlled by the level of signal inputted
through the audio input hole
Specifications of horns: 5w per 80hms
POWER SAVING MODE:when the treadmill is out of using for
5mins, the machine will enter power saving mode.At this time,
screen will show nothing, press WAKE key can wake up the
computer.
It can control the fan to start and stop .
FAN HIGH/LOW
SPEED CHANGE
After fan start, press this key can change the fan speed from
high to low.
This hole can charge for iOS and Andriod set, the output
power is 5V,1A.
To Next Page
Loading...
General