Note: When replacing propellers for the VTOL modules no lock bond is required as these are self-
tightening. When replacing the pusher motor propeller lock bond is required on the propeller adapter
nut as this motor can spin in both directions.
To disassemble the DeltaQuad open the lock pins for the wings and remove the wings.
Note: Never remove the carbon spars while the VTOL modules are attached. This could damage the wing-
joiners.
Note: Never store or put the vehicle with the LiPo battery inside the vehicle.
It is recommended to transport the DeltaQuad in the DeltaQuad Flight Case. If you do not have a DeltaQuad
Flight Case It is recommended to transport and store the DeltaQuad with the VTOL modules attached.
The DeltaQuad series UAV is compatible with the DeltaQuad High Grade LiPo Battery. Using other batteries
is not recommended and will impact your warranty.
To Next Page
Loading...