screws when re-attaching.
Replace the propellers
Perform a sensor calibration
After 200 flights or 12 months
To keep your vehicle in the best condition and safe to operate beyond this point
should be performed. This entails the preventive replacement of many components and a thorough
inspection and test flight.
scheduled maintenance
The DeltaQuad has been designed to allow easy replacement of components. Every component on the
DeltaQuad is available as a replacement part. If you require replacements parts please contact Vertical
Technologies.
When replacing motors or elevon linkages, lock bond must be used on all screws and nuts.
When replacing propellers for the VTOL modules no lock bond is required as these are self tightening.
When replacing the pusher motor propeller lock bond is required on the propeller adapter nut as this motor
can spin in both directions.
The recommended service cycle for the DeltaQuad UAV is 200 flights or 12 months, which ever comes first.
Beyond this point the vehicle can fly less efficient and there could be a potential risk of failure. Using the
Vertical Technologies you can extend the lifetime of your vehicle and
maintain your warranty.
Extended Maintenance Service
Vehicles flown beyond the recommended maintenance cycles void their warranty.
Extended Maintenance Service
With the Extended Maintenance Service you can send back your vehicle and we will completely refurbish it.
It will be returned as good as new. If the vehicle was damaged beyond repair it can be completely replaced.
To Next Page
Loading...