Vertiv™ Liebert® STS2
SL-20610_REV12_09-21 6 Guide Specifications
Proprietary and Confidential © 2021 Vertiv Group Corp.
1.5.3 Delivery Submittal
Submittals upon STS delivery shall include a complete set of submittal drawings and one (1) installation,
operation and maintenance manual that shall include a functional description of the equipment with block
diagrams, safety precautions, instructions, step-by-step operating procedures and routine maintenance
guidelines, including illustrations.
1.5.4 Spare Parts
A list of recommended spare parts shall be furnished upon request.
1.6 Warranty
The manufacturer shall provide a warranty against defects in material and workmanship for 12 months
after initial system startup or 18 months after ship date, whichever occurs first. (Refer to the Warranty
Statement for details.)
1.7 Quality Assurance
1.7.1 Manufacturer Qualifications
A minimum of five years’ experience in the design, manufacture and testing of STS systems is required.
The specified system shall be completely factory-tested before shipment. Testing shall include, but shall
not be limited to: quality control checks, Hi-Pot test (two times rated voltage plus 1000 volts, per UL
requirements), transfer tests and metering calibration tests. The system shall be designed, manufactured
and tested according to world-class quality standards. The manufacturer shall be ISO 9001 certified.
1.7.2 Factory Testing
Before shipment, the manufacturer shall fully and completely test the Vertiv™ Liebert® STS2 to assure
compliance with the specifications.
To Next Page
Loading...
