Need help?Do you have a question about the Vertiv NetXtend Flex 20 and is the answer not in the manual?
General safety precautions to be observed when handling and installing the enclosure.
Warning about hazardous voltage and associated risks.
Required Personal Protective Equipment for safe operation and maintenance.
Purpose of the practice guide for installation instructions.
Overview of the NetXtendâ„¢ Flex outdoor enclosures and their capabilities.
Details on standard sizes, color, finish, and lifting features.
Recommended sequence for installation and start-up procedures.
Required tools and material for installation.
Step-by-step procedure for opening an enclosure door.
Procedure for installing a concrete foundation pad.
Procedure for pad mounting the enclosure.
Guidance on installing OSP cables.
Safety precautions for AC power, including electrical shock and hazard.
Procedures for grounding the enclosure.
Step-by-step procedure for installing batteries.
Procedure for wiring -48Vdc battery strings.
Information on heat exchangers and their operation.
Information on Thermoelectric Coolers (TEC) and their operation.
Function of the ECU in controlling heat exchanger thermal components.
Procedure for battery maintenance.
Procedures for cleaning standard and hydrophobic filters.
Procedure for replacing heat exchanger fans.
General safety precautions to be observed when handling and installing the enclosure.
Warning about hazardous voltage and associated risks.
Required Personal Protective Equipment for safe operation and maintenance.
Purpose of the practice guide for installation instructions.
Overview of the NetXtendâ„¢ Flex outdoor enclosures and their capabilities.
Details on standard sizes, color, finish, and lifting features.
Recommended sequence for installation and start-up procedures.
Required tools and material for installation.
Step-by-step procedure for opening an enclosure door.
Procedure for installing a concrete foundation pad.
Procedure for pad mounting the enclosure.
Guidance on installing OSP cables.
Safety precautions for AC power, including electrical shock and hazard.
Procedures for grounding the enclosure.
Step-by-step procedure for installing batteries.
Procedure for wiring -48Vdc battery strings.
Information on heat exchangers and their operation.
Information on Thermoelectric Coolers (TEC) and their operation.
Function of the ECU in controlling heat exchanger thermal components.
Procedure for battery maintenance.
Procedures for cleaning standard and hydrophobic filters.
Procedure for replacing heat exchanger fans.
General| Model | NetXtend Flex 20 |
|---|---|
| Width | 600 mm |
| Depth | 1000 mm |
| Material | Steel |
| Color | Black |
| Height | 1066.8 mm |
| Product Type | Enclosure |
To Next Page
