Introduction
In order to prepare customized presets and upload them to the KM
it is required to use the KM Configuration tool. This function is
limited only to authorized administrators performing login.
This Configuration Manual provides all the details required to
manage and configure this function.
Intended Audience
This document is intended for the following professionals:
• System Administrators/IT Managers
Revision
A – Initial Release, 11 June 2015
B – User Guidance updates, 21 June 2015
C – Changing to VERTIV new branding, 20 May 2019
Important Security Note:
If you are aware of potential security vulnerability while
installing or operating this product, we encourage you to
contact us immediately in one of the following ways:
• Email: Secure@VertivCo.com
• Tel: +1-888-793-8763
Important: This product is equipped with always-on active anti-
tampering system. Any attempt to open the product enclosure
will activate the anti-tamper triggers and render the unit
inoperable and warranty void.
To Next Page
Loading...
