Need help?Do you have a question about the Vespa PK 80 S and is the answer not in the manual?
Details the purpose and applicability of the amendment to the service manual.
Provides diagrams for electrical system troubleshooting and reference.
Outlines the steps for taking apart, repairing, and putting back together vehicle components.
Lists key technical specifications for the base model.
Provides a schedule of maintenance tasks and intervals for various components.
Details the electric and mechanic benefits of the electronic ignition system.
Explains the components of 4 and 6 pole flywheel magneto ignition systems.
Outlines essential safety precautions when working with electrical systems.
Provides steps for diagnosing and fixing ignition system faults.
Highlights component differences for the Vespa Elestart model.
Details the procedure for putting a new battery into service.
Explains how to check and maintain battery electrolyte level and charge status.
Outlines tests to perform on the starter motor after revision.
Instructions for removing the flywheel rotor assembly.
Steps for removing the upper steering column nut.
Guide for removing the front wheel brake drum and associated parts.
Details piston-cylinder clearances and assembly guidelines.
Instructions for assembling connecting rods and roller cages based on categories.
Steps for disassembling the steering unit and front suspension components.
Procedure for removing the pin and roller bushes from the suspension.
Instructions for removing the security lock cylinder.
How to use the specialized tool for lubricating transmission cables.
Lists specifications for different carburettor models.
Procedures for testing headlamp bulb terminal voltage under various conditions.
Outlines the steps and apparatus for testing the voltage regulator.
Specifies torque values for engine unit fasteners.
Lists torque values for front suspension components.
Details how to check engine timing using a stroboscopic gun for 4-pole flywheels.
Instructions for assembling roller cages and oil seals onto the brake jaw plate.
Outlines the steps and conditions for conducting road consumption tests.
Explains how to interpret fuel consumption test results for acceptable efficiency.
Lists essential operations and checks before handing the vehicle over to the owner.
To Next Page
General
