EasyManua.ls Logo

Vespa P 200 E User Manual

Vespa P 200 E
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Vespa P 200 E and is the answer not in the manual?

Vespa P 200 E Specifications

General IconGeneral
BrandVespa
ModelP 200 E
CategoryScooter
LanguageEnglish

Summary

Vehicles with « LS >> device

General instructions for maintenance and lubrication

Fault finding

Electronic ignition (<< DUCATI >> type) for Vespa P 200 E

Main advantages

Details the key benefits of electronic ignition over traditional systems.

Mechanic advantages

Outlines the mechanical benefits of the electronic ignition system.

Vespa « P 125 X-P150 X - P 200 E » with front and rear turn signals

Instructions for eliminating faults of the electric equipment for vehicles « P 125 X P 150 X and P 200 E » with turn signal lamps.

Vespa « P 125 X-P150 XP 200 E » with battery and front and rear turn signal lamps

Instructions for eliminating faults of the electric equipment for vehicles « P 125 X P 150 X and P 200 E » with turn signal lamps and battery.

All units not functioning

Addresses faults where the entire electrical system fails to operate.

Turn Signal System Faults

Covers issues with turn signal lamps, switch, intermittence, and earthing.

Complete disassembly of vehicles

Engine Component Disassembly

Step-by-step guide for disassembling engine parts and sub-assemblies.

Overhauls

Flywheel magneto testing and timing

Covers testing and setting the timing for the flywheel magneto.

Crankshaft: Overhaul

Operations for crankshaft overhaul and instructions for tooling use

Provides instructions for crankshaft overhaul using specialized tools.

Carburettor overhaul

Modification of carburettor

Gear control: overhaul

Front suspension unit overhauling

Crankcase to chassis suspension group overhaul

Cable harness from chassis

Reassembly of vehicles

Locking torque - Pares de blocaje

Reassembly

Engine and flywheel magneto timing.

Operations and checks before operating