14
7. Pouch Inspection
Vacuum
– check the quality of the vacuum by looking at the
tightness of the pouch and the product. If you notice
air pockets increase the vacuum time by 5 seconds
and test again. The vacuum time could take up to 60
seconds depending on the pouch size and the
volume of the product being packaged.
Seal
– Inspect the pouch seal.
NOTE: A positive seal will look “clear” upon inspection. If the
seal is “spotty or incomplete”, increase the sealing time by 1
second. If the seal is “white or milky”, decrease the seal time
by 1 second.
Restoring defaults
With the C25v in Power Saving mode (LED displays “OFF”), press
“Set” + ”^” buttons simultaneously for 3 seconds. When the
machine beeps and displays rS, the default settings will be
restored.
To Next Page
Loading...