Why won't my VESTEL 49FA9000 turn on?
Your VESTEL LED TV might not be turning on because the power cable is unplugged. Ensure it's properly plugged into the wall. Alternatively, the remote's batteries may be dead. Try replacing them and then press the On/Off button on the TV itself.
What to do if my VESTEL 49FA9000 LED TV has no display?
If your VESTEL LED TV shows no display, it might not be receiving a broadcast. Ensure you have a broadcast signal. Also, check that the antenna is correctly connected and that the antenna cable isn't damaged. Verify you've selected the correct input source and are pressing the right buttons on the remote.
Why is the image quality bad on my VESTEL 49FA9000?
Poor image quality on your VESTEL LED TV could be due to several reasons. Ensure the correct TV system is selected. A low signal level can distort the image, so check the antenna connection. If performing a manual search, verify the frequency settings are entered correctly. Also, avoid connecting the antenna to two external devices simultaneously; disconnect one of them.
What to do if my VESTEL 49FA9000 LED TV remote control does not work?
If the remote control for your VESTEL LED TV isn't working, first replace the batteries. Ensure they are inserted correctly, following the proper direction. Also, make sure there isn't anything blocking the remote's signal to the TV.
What to do if my VESTEL 49FA9000 LED TV is displaying but has no sound?
If your VESTEL LED TV is displaying video but has no sound, the TV might be muted. To unmute, press the mute button or increase the volume.
Why do videos not stream properly on my VESTEL 49FA9000?
If videos aren't streaming well on your VESTEL LED TV, the internet connection may be slow. Contact your internet service provider to check if your internet plan is sufficient or if there are infrastructure issues.
What to do if I can't select input options on my VESTEL 49FA9000?
If you can't select input options on your VESTEL LED TV, ensure a device is connected to the TV. If you've connected a device, verify that the AV cables and connections are correct.
How to fix error messages about connection problems on VESTEL 49FA9000 LED TV?
If you're seeing connection error messages on your VESTEL LED TV, check the TV's connection to the wireless internet. Also, ensure that your modem is properly connected to the internet by testing it with another device.
What to do if my VESTEL 49FA9000 display is bad in computer mode?
If the display looks bad when your VESTEL LED TV is in computer mode, the screen resolution and settings of your computer and TV may be incompatible. Try changing the resolution settings on your computer.
Why is sound only coming from one speaker on my VESTEL 49FA9000?
If sound is only coming from one speaker on your VESTEL LED TV, the balance setting might be adjusted too far to one side. Check the audio menu to adjust the balance.
General| TV Broadcasting | PAL BG/DK/II’ SECAM BG/DK |
|---|---|
| Receiving Channels | VHF (BAND I/III) - UHF (BAND U) - HYPERBAND |
| Digital Reception | Fully integrated digital terrestrial-cable- satellite TV(DVB-T- C-S) (DVB-T2, DVB-S2 compliant) |
| Number of Preset Channels | 10.000 |
| Channel Indicator | On Screen Display |
| Display | 49” |
| RF Aerial Input | 75 Ohm (unbalanced) |
| Operating Voltage | 220-240V AC, 50Hz. |
| Power Consumption (W) | 100W |
| Audio | German+Nicam Stereo |
| Audio Output Power (WRMS.) (10% THD) | 2x10W |
| Operation temperature and operation humidity | 0ºC up to 40ºC, 85% humidity max |
Weight and Dimensions| TV Dimensions DxLxH (with foot) (mm) | 276 x 1095 x 695 |
|---|---|
| TV Dimensions DxLxH (without foot) (mm) | 34(min)/67(max) x 1095 x 631 |
To Next Page