27
You can press the On/Off button (4) to switch on the machine. On/off lights will be on so long as the
machine is on. Press the program button (5) to set the suitable program.
Press the Start/Pause button (6) to start the program. Once the selected program has started, the Wash-
ing light will be on and the program duration will be displayed. If you open the door of the machine while
the program is continuing, program number and program duration will be displayed alternately.
You can follow the program ow with the Washing, Rinsing, Drying and End lights (7) on the control
panel. Once the drying light has become on, the machine will remain silent for 40 to 50 minutes.
NOTE: If you press the option button (3) once, half load option will be activated. This option will shorten
the durations of the selected programs to reduce power and water consumption. If you are using com-
bined detergents that contain salt, rinse aid and extra features, press the option button for the second
time and activate the tablet function. You can use the Extra button to add the following
functions to the compatible washing program.
When the hygiene function is active, you can make the washing process more hygienic by changing the
washing temperature and durations of the current program.
If you select the extra rinsing function, the extra rinsing light will become on and thus, washing-rinsing
steps will be added to the selected program, making your dishes cleaner and shinier.
If you select the extra drying function, the extra drying light will become on and thus, drying duration of
the selected program will extend, making your dishes drier. Additionally, Hygiene and Drying functions
cannot be selected at the same time since they are incompatible with each other.
If you have used any extra function in the washing program that you last used, that function will be active
in the next washing program. If you want to cancel that function for the newly selected program, press
and hold the button of the relevant function since the corresponding lights go off, or press the On/Off
button (4) to switch off the machine. If you want to use an extra function for the newly selected program,
select the desired functions.
If you want to change the delay time, press the Start/Pause button rst, and then press the Delay button
to select the new delay time. Press Start/Pause button to activate the new delay time. To cancel the
delay, press the Delay button until the delay time is 0h.
NOTE: If you switch off the machine after selecting the delay time and starting the program, the delay
time will be cancelled.
NOTE: You can press the delay button (2) before the program starts to delay the program start time for 1
to 19 hours.
NOTE: Salt rell indicator (9) will become on if salt is missing/insufcient. In this case, please ll the salt
compartment.
NOTE: Rinse aid rell indicator (9) will become on if rinse aid is missing/insufcient. In this case, please
ll the rinse aid compartment.
Program Selection and Operating the Machine
9
To Next Page
Loading...
