To Next PageTo Next Page
Need help?Do you have a question about the Vetus Bow Thruster BOW PRO A Series and is the answer not in the manual?
General| Brand | Vetus |
|---|---|
| Model | Bow Thruster BOW PRO A Series |
| Category | Outboard Motor |
| Language | English |
Details of warning symbols used in the manual for safety context.
Explanation of symbols indicating required actions or prohibitions.
Guidelines for optimal placement of the thruster tunnel for performance.
Ensuring correct placement of the bow thruster within the tunnel.
Methods for connecting the thrust tunnel to the ship's hull with or without fairing.
Guidance on fitting grid bars in tunnel openings for thruster protection.
Steps for installing the thrust tunnel, including material preparation.
Instructions on drilling holes in the thrust tunnel according to templates.
Measures to prevent corrosion, including anode use and insulation.
General notes on thruster installation, component supply, and ventilation.
Steps for fitting the tailpiece and intermediate flange with sealant.
Procedures for propeller installation, coupling, and motor mounting.
Covers battery selection, main power cables, main switch, and fuse requirements.
Connecting main power and control voltage cables, and configuring the thruster.
General operation, switching panels on/off, and restoring factory settings.
Explanation of the meaning of LED indicator lights on the control panels.
Steps for configuring panels for thruster type, helm station, and thrust direction.
Diagram showing wiring for a single thruster with one helm station.
Diagram for one thruster with two helm stations.
Diagram for one bow and one stern thruster with one helm station.
Diagram for multiple thrusters and helm stations.
Diagram illustrating battery connection for a 12V thruster.
Diagram for connecting a 12V battery to bow or stern thruster.
