To Next PageTo Next Page
Need help?Do you have a question about the Vetus BOW7512 and is the answer not in the manual?
General| Brand | Vetus |
|---|---|
| Model | BOW7512 |
| Category | Outboard Motor |
| Language | English |
Critical safety warnings and general precautions for operating the thruster.
Instructions on how to operate the bow thruster correctly and safely.
Advice for optimal performance and reliability during installation.
Guidance on determining the ideal location for the thrust tunnel.
Methods for connecting the tunnel to the ship's hull for performance.
Installation of protective grid bars in tunnel openings to minimize resistance.
Measures to prevent corrosion of the bow thruster components.
Instructions for preparing and laminating a polyester thrust tunnel.
Steps for drilling and fitting the thrust tunnel into the hull.
Assembling the tail piece and intermediate flange to the tunnel.
Connecting the electric motor and propeller for final assembly.
Guidance on selecting the appropriate battery capacity and type.
Recommendations for main power cable diameter and installation.
Selection and purpose of the main fuse for the bow thruster.
Instructions for wiring the control panel and connecting power supply cables.
Information on the optional time-delay unit for motor control.
Procedure to verify and correct thrust direction based on wiring.
Inspecting carbon brushes for wear and replacing them as needed.
Lubrication of the tailpiece and renewal of the zinc anode.
Cleaning and greasing the propeller shaft during maintenance.
Diagnosing and resolving issues with the electric motor's operation.
Troubleshooting blown fuses or lack of thrust.
Troubleshooting oil leaks from the thruster tailpiece.
Details on motor type, voltage, current, and transmission ratio.
Information on propeller material, thrust, and tunnel dimensions.
Diagrams showing typical single thruster installations on different hulls.
Examples of installing two thrusters on a catamaran.
Schematic representation of the bow thruster's electrical system.
Explanation of the colour codes used for the wiring.
Further details on identifying cable colours for correct connections.
Visual representation of the thruster's measurements and placement constraints.
