10. Only use the cable provided with the unit. The use of other cables may result in
electric shock, fire or cause serious damage to the unit. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
11. Do not use the unit if the power cord is damaged or if the plug socket contact is
loose. Not following these instructions may result in electric shock, fire or other
hazards.
12. Do not place heavy objects over the cord and do not bend it excessively since
it could get damaged. Not following these instructions may result in electric shock,
fire or other hazards.
13. This equipment is not suitable for use in locations where children are likely to
be present.
14. The power cord of the product should be connected to a socket-outlet with
earthing connection.
SAVE THESE INSTRUCTIONS
Keyboard Coin Hopper
Back Cover
Power Switch
Electrical Wire
Coin Drawer Fuse(at the bottom)
To Next Page
Loading...