Batch preset number display
1.Make sure that the machine is put on level and then turn on the machine.
2.Set an expected batch.
Each channel can be set an expected batch (from 0 to 999). Press the “SET” key
to select the channel, and the “BAT” key, “+” key and “-” key to set the expected
batch number.
Note 1: If some channels set the batch to 0, the machine will not stop this channel
even the drawer is full, unless the “START/STOP” key is pressed or no coin drop
though the channel within 20 seconds.
Note 2: Keep “-” key pressed in 7 seconds can set all the channels to batch 0.
Note 3:The batch setting can be automatically memorized.
To Next Page
Loading...