concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision
19) Type Z attachment: If the supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
20) In order to avoid a hazard due to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
21) Operational Safety: Never point the spray gun at yourself or others due to
the risk of serious injury from high pressure.
22) Injury and Poisoning Risk: High pressure can introduce toxins into the blood,
leading to infection or poisoning. Seek medical attention if injured.
23) Cleaning and Maintenance: Before cleaning, repair, or maintenance, turn off
the motor, set the high-pressure switch to "t", release hose pressure by pulling
the gun's trigger, and secure the safety catch.
24) Spare Parts Requirements: Replacement parts should withstand at least
205 bar pressure.
25) Usage Location: Use or clean the spray equipment only outdoors or in
well-ventilated areas.
26) Material Usage: Do not use materials with a flash point below 21°C.
27) Electrostatic Risk: To prevent fire or explosion risks from static electricity,
ground both the spray equipment and the surface to be sprayed.
CAUT IO N: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
To Next Page
Loading...
