Care and maintenance
WARNING: Disconnect power supply before servicing. See SAFETY
INFORMATION before proceeding. Routine maintenance should be done
at least once a year.
• Wash grille with mild soap and water, dry with a cloth.
• Remove excess dirt and dust from the fan housing with a vacuum
cleaner.
• Do not use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse resin parts in water over 60º C.
TROUBLESHOOTING
Q: Excessive noise
A: 1. It is normal that there is noise during operation. If too loud, please set
the fan to lower speed.
2. Check if the blade is installed properly.
Q: Fan does not operate
A: 1. Make sure the fan is connected to a powered electrical outlet.
2. Clean the blade regularly.
Made In China
To Next Page
Loading...
