To Next PageTo Next PageWhat to do if the light does not work in my VEVOR Freezer?
If the light in your VEVOR Freezer isn't working, start by checking the power connection. If that's not the issue, check the circuit breaker and reset it if tripped, or replace the fuse if blown. If power isn't the issue, the LED light may be out of order and require replacement. Alternatively, the door pressure switch might be faulty and need repair or replacement.
Why does my VEVOR Freezer make too much noise?
Your VEVOR Freezer might seem noisy for a few reasons. Rattling sounds can be normal due to the flow of refrigerant. Gurgling sounds are also typical at the end of a cycle, and popping or crackling noises may occur. However, if the noise seems excessive, ensure the unit is level.
How to fix vibrations in my VEVOR Freezer?
To address vibrations in your VEVOR Freezer, make sure the unit is level.
General| Brand | VEVOR |
|---|---|
| Model | BC-145WS |
| Category | Refrigerator |
| Language | English |
Contact details for product questions and technical support via website.
Critical safety instructions for electrical hazards, flammable materials, and child safety.
Key warnings for installation, ventilation, electrical connections, and proper usage.
Guidelines for handling flammable R600a refrigerant to prevent leaks and ignition.
Initial setup including odor clearing and selecting the optimal location.
Instructions for unpacking, positioning, leveling, and built-in configurations.
Details on proper electrical supply and grounding for safe operation.
First-time power-on procedures and expected temperature stabilization.
Explanation of the control panel lock and button operations for single/double zones.
How to set, monitor, and switch temperature display units for different models.
Operation of interior light and clarification on temperature settings and ambient conditions.
Default temperature settings for various models at the factory.
Troubleshooting common issues and behavior during power interruptions.
