1) ON/OFF
Press for 5 seconds, car fridge will enter the standby mode.
Note: After shutting down the car fridge and restarting, there are 3 minutes
delay for the compressor to start to work.
2) Temperature Set
Press the / to flash to display the control temperature，and then press
the / to the change the value and memorize；if you do not press any
key ，the
temperature in the box will be restored after 5 seconds .
Note: The cabinet temperature in the fridge > the setting
temperature(+3
℃
), and compressor turned on. When the cabinet
temperature in the fridge =the setting
temperature, compressor stops working.
3) Parameter Functions
℃: Celsius degree ℉: Fahrenheit degree
ECO: Energy saving mode HH: Fast cooling mode
Press the SET button enter the setting state
，
at the same time flash F
，
then Press the SET button to change the parameter selection ，and
display in order F,C,ECO,HH.
4) Different Light Indicators
After the car fridge is turned on , the POWER indicator is red ; when 3
minutes
later,the POWER indicator will turn green ,which means the compressor
starts
working. When press SET button to ECO mode , the ECO/ MAX indicator
is green , when press SET button to HH( MAX) mode , the ECO/ MAX
indicator is red.
Note: Factory default is MAX mode .
5) Battery Protection Function
Selecting the Low, Med , High position of the switch( next to the DC power
socket) , you can choose different levels for battery protection. In the
To Next Page
Loading...
