VEVOR BCD32 - Page 11

- 9 -
below sheet you can find the voltages when the compressor stops
running(cut-out)and when the compressor restarts.
Battery
protection
12V cut out
12V cut in
24V cut out
24V cut in
LOW
10.2±0.3V
11.2±0.3V
21.6±0.3V
23.0±0.3V
MED
10.7±0.3V
11.7±0.3V
22.6±0.3V
24.0±0.3V
High
11.7±0.3V
12.7±0.3V
24.6±0.3V
26.0±0.3V
Note:The voltage as above form refers input voltage of the compressor,
not battery output voltage .
All of our car fridges are designed with DC12V/24V, can be used on
AC100-240V with AC adapter.
6) Power Memory Function
After restart ,the temperature set will be the same with the one you set
before power off .
Different Error Situation & How To Fix
1) Error Situation
• The refrigerator does not work
— Check if the power supply is connected correctly (whether the plug is
loose , whether the positive and negative poles are connected incorrectly)
— Check if the ventilation conditions are normal .
— Check if the fuse is blown
— Check if the power switch on the control panel is turned on .
• Abnormal noise in the refrigerator
— The car refrigerator is not placed evenly
— Hit the wall or other items
— internal parts loose or fall off
• Condensation on the surface of the refrigerator