①Take down the stainless chain
by crossscrewdriver.
②Take down the two hinges.
③Install the two hinges on the
otherside between the door and the
tank.
④Install the stainless chain on the
other side between the door and the
tank.
·Power Supply: connect to DC 12V/24V or AC 100-240V power (using
dedicated adapter).
· Display Screen Initialization: connect to the power supply,the buzzer
will make a long beep,and the display will be on for 2 seconds then enter
the normal operating mode.
·Power ON/OFF: press to switch ON/OFF.
To Next Page
Loading...
